Luxury Separate Hybrid Solar Water Heaters with Enamel Storage Tank

Separate Hybrid Solar Water Heaters Purpose designed solar cylinders with high efficiency coils full optimized for SWH Choice

Luxury Separate Hybrid Solar Water Heaters with Enamel Storage Tank

Features:. Uses structure of heat collector separated from  storage tank.. The heat collector can be put on balcony, roof or flat  place or outdoor wall surface. The storage tank can be  put anywhere in room according to your need.. Successfully carries out installation of separation  according to fabricating yard and is harmoniously  blended with architecture.. Digital display of water temperature. Anti-freeze: no water inside the tubes when it worksSpecifications:. Pipes: 47 x 1,500 mm; 58 x 1,800 mm. Water tank capacity: 80 - 500 L. The length of heat-gathered tube: 1.5/1.8/2.0 m. The number of heat-gathered tube: 15/16/18/20/24/30. Pressure: 0.6 MPa. Heat holding material: polyurethane. Water tank material (inside): SUS304 2B stainless  steel. Water tank material (outside): stainless steel or  aluminum alloy or color steel plate. Frame material: aluminum alloy or stainless steel

Specification	Solar split system	With none heat exchanger
1) Solar Tube	Φ58*1800mm	Three target vacuum tube
	Life time:15years	Warranty time:5years
2)Heat Pipe	Copper material	Transmit power:5years
	Life time:15years	Warranty time:5years
3)Inner tank	Enamel tank	Thickness:2.5to 3.5mm
4)Outer tank	Color steel	Thickness:0.31mm
5)Tank Volume	80L to 500L
6)Insulation	Polyurethane
7)Copper coil	None
8)Accessories	P/T valve E-heater	Mg anode,Check valve,drain valve,Solar controller
9)Work pressure	6 Bar (0.6Mpa)	Test pressure:12bar (1.2Mpa)
10)Warranty time	5years	Life time:15years
11)Packing	Export carton

Luxury Separate Hybrid Solar Water Heaters with Enamel Storage Tank